APsystems® EZHI Micro-Inverter
State-of-the-Art Technology
The EZHI is a compact energy storage solution specifically designed for balcony power plants and DIY systems. The EZHI features two input channels with independent MPPTs, offering high input current and high output power to meet the demands of modern high-performance modules.
The main advantage of this system is the ability to store excess energy generated during the day, optimizing energy efficiency, maximizing self-consumption, and sustainably reducing electricity costs.
Outstanding Performance
The EZHI uses advanced GaN technology, enabling continuous fast charging up to 40A. Thanks to its fanless design, it operates ultra-quietly , while the transfer time to UPS level with less than 10ms ensures uninterrupted power supply. Additionally, the unit offers a maximum input power of 2 × 600W.
Highest Safety
A key highlight of the EZHI is its robust IP65 protection rating, ensuring reliable protection against dust and water. With a battery input voltage of 51.2V, optimal operational performance is guaranteed. The intelligent charging technology extends the battery lifespan , while the high- and low-voltage isolation topology contributes to maximum operational safety.
Intelligent Energy Management
The EZHI offers an intelligent 24-hour energy management system that efficiently controls and monitors energy flows. Through the EMA operating and maintenance platform, system performance and operational status can be analyzed in real-time . The quick and easy configuration via the app ensures user-friendly setup and optimized maintenance.
Versatility and Flexibility
TThe EZHI stands out with its highest flexibility , offering optimal protection against environmental factors thanks to its IP65 rating. It is compatible with various battery brands and supports capacity expansion through multiple battery packs. Additionally, it enables AC coupling in a balcony PV-System with micro-inverters. The modular installation of split batteries allows for even more customized adjustments to different deployment scenarios.
EZHI Application Illustration
Packing List:
Special features:
Designed as a balcony PV-System or portable power station
Cost-effective compared to conventional power stations
AC-Coupling with other micro-inverters
Capacity expansion through the use of multiple battery packs
Maximum continuous output power (On-Grid connection): 800W
Maximum continuous output power (Off-Grid and battery connection): 1200W
Supports two PV modules with an input power of 430-900Wp
Maximum reliability – IP65 protection class (dustproof and waterproof)
Integrated Wi-Fi and Bluetooth module
VDE relay integrated
Standard 12-year warranty
Technical Specifications
Model
EZHI-EMEA
PV Input Data (DC)
Maximum input power
600W×2
Recommended Input Power (STC)(1)
430Wp-900Wp+
Operating voltage range
12V-60V
Maximum input voltage
60V
MPPT voltage range
12V-48V
Start-up voltage
18V
Maximum continuous input current
17A x 2
Isc PV
25A x 2
AC Input and Output (on-grid Port)
Grid type
Single-phase
Nominal AC voltage(2)
230V
Nominal AC frequency(2)
50Hz
Default output apparent power(3)
800VA
Maximum continuous output power
1200VA
Maximum continuous output current(4)
5.22A
Maximum continuous input power
1200VA
Maximum continuous input current(4)
5.22A
Power factor range
>0.99(+/- 0.8adj.)
EPS Switch Time
<10ms
AC Input and Output (off-grid Port)
Grid type
Single-phase
Nominal AC voltage
230V
Nominal AC frequency
50Hz
Maximum continuous output power
1200VA
Peak output apparent power
1800VA, 10s
Maximum continuous output current
5.22A
Maximum continuous input power
2400VA
Maximum continuous input current
10.43A
Battery Ratings (Battery Port)
Battery voltage range
40-60VDC
Nominal battery voltage
51.2V
Communication Ports
CAN
Maximum Continuous Discharge Power
1200VA
Peak Discharge Power
1800VA,10s
Maximum discharge current
27A
Maximum charge current
40A
General Specifications
Dimensions W/H/D
351mm×269mm×47mm
Weight
8 KG
Maximum Efficiency
96.2%
Operating Ambient Temperature Range
-40℃-65℃
Storage Temperature Range
-40℃-85℃
Ingress Protection
IP67
Relative Humidity
10%-90%
DC Connector Type
QC4.3 Connector With Lock
Cooling
Natural Convection-No Fans
Maximum Altitude
<2000m
Overvoltage Category
OVC II For PV and Battery Input Circuit, OVC III For Mains Circuit
Featurese
Communication
Built-in Wi-Fi and Bluetooth
Energy Management
AP EasyPower APP
Warranty
12 Years Standard
Energy Management
AP EasyPower APP*
Safety, EMC & Grid Compliances
EN 62109-1/-2; EN 62477-1; EN IEC 61000-6-1/-2/-3/-4; EN 62920; VDE-AR-N 4105;EN303 645
(1)Two modules with STC less than 450 W can be connected in parallel for each input channel.
(2)The nominal voltage/frequency range may vary based on local requirements.
(3)It is the ratio of max. output apparent power to nominal AC voltage.
(4) The maximum power can be utilized for charging from both PV and AC port.
Phylion® BDB-2.76L Solar Battery Storage 51.2V, 2760Wh
Special Features:
Lithium iron phosphate battery with high safety level
High-precision voltage and current monitoring, and state-of-charge estimation
Maximum reliability – IP65 protection class (dustproof and waterproof)
Charging temperature: -20℃ to 55℃
Discharge temperature: -20℃ to 60℃
6000 life cycles at 0.5C, 25°C, 80% DOD
Flexible capacity expansion and compatibility
Technical Specifications
Batterie Model
BDB-2.76L
Rated Voltage
51.2V
Rated Capacity
54Ah
Rated Energy
2760Wh
Charge Cut-off Voltage
57.6V
Discharge Cut-off Voltage
40V
AC Internal Resistance
< 120mΩ
Maximum Continuous Charging Current
30A @25°C
Maximum Charging Voltage
57.6V
Maximum Continuous Discharge Current
20A
Discharge Protection Current
30A @25°C
Charging Temperature
-20℃~55℃
Discharge Temperature
-20℃~60℃
Storage Temperature
-10℃~35℃
Cycle Life
6000 Cycles @0.5C, 25°C, 80% DOD
Communication Method
CAN Communication
Protection Class
IP65
Exterior Material
Sheet Metal
Mounting Method
Floor Stand of Wall-Mounted
Battery pack dimensions (W*D*H)
350 x 160 x 480 mm (excluding Handle)
Weight
29.6kg ±3%
Certification
IEC62619/CE/UN38.3
Warranty
2 years
Installation Videos
VIDEO
VIDEO
EZHl Single-phase Hybrid Microinverter for Storage
Installation-System Installation
EZHl Single-phase Hybrid Microinverter for Storage
Installation-Extended Functionality
VIDEO
VIDEO
EZHl Single-phase Hybrid Microinverter for Storage
Installation-AP EasyPower-Remote Mode
EZHl Single-phase Hybrid Microinverter for Storage
Installation-AP EasyPower-Direct Connect Mode
Product safety information
Manufacturer information:
SolarV GmbH Am Kronberger Hang 2
Hessen Schwalbach am Taunus, Deutschland, 65824
info@solarv.de www.solarv.de
▶ 1. Why can't my device connect to the network?
Please check in the following ways:
Please confirm that only our APP can connect the device to the network.
Please confirm whether the entered Wi-Fi password is correct, and pay attention to whether there are spaces and case issues before and after the Wi-Fi account or password.
The device only support 2.4GHz brand Wi-FI.
Please check if the device is properly powered on.
If the network is normal but the device fails to connect, please confirm whether the router is overloaded. You can try turning off the Wi-Fi function of a device to free up channels for reconfiguration.
The location of the device is too far away from the router (the indoor environment is more complicated, it is easy to fail after more than 5 meters; the outdoor environment is empty, it is easy to fail after more than 10 meters).
If your problem still exists, provide APsystems with your device ID, We will arrange for technical support engineers to troubleshoot this issue.
Thank you for your support and understanding.
▶ 2. Why is my device offline?
f your device is offline for a long time, you can only manually reset the device's networking, and then manually add the device again. If your device always offline, please check in the following ways:
Check whether the router is powered off or disconnected from the network. If so, the router will take some time to recover. Wait for two minutes and then check whether your device is online.
Check whether the router has been replaced, or the Wi-Fi name or password has been changed. If so, remove your device and then add it to the network again.
The Wi-Fi signal of the device is too poor (for example: there are several walls separated from the router; the device is surrounded by a metal shell or there are metal objects nearby; nearby high-power Appliances such as air conditioners and refrigerators interfere).
The location of the device is too far away from the router (the indoor environment is more complicated, it is easy to go offline after more than 5 meters; the outdoor environment is empty, it is easy to go offline after more than 10 meters).
Check whether the firmware is the latest version. To check this on the App, choose Home-Tap settings icon—Tap device— Firmware Update.
If the device goes offline after a period of use, but after restarting the router or re-networking the device, the device returns to normal. Indicating that the router is overloaded due to long-term high-load use, and you need to replace it with a more powerful one, or reduce the number of devices connected to the router.
You can also use a phone hotspot to check whether it is the problem of network.
If your device still fails to connect to the network after the preceding steps, place your device in a network environment with strong and stable signals and connect it to the network again. If your device is still offline, provide APsystems with device ID. We will arrange for technical support engineers to troubleshoot this issue.
Thank you for your support and understanding.
▶ 3. What should I do if my router is a 5GHz network?
Most routers on the market are dual-band routers, which have both 2.4GHz and 5GHz brand. Please choose 2.4GHz brand for connection, because currently our products only support 2.4GHz brand, please check in the following ways:
If the Wi-Fi name has not been changed; In the Wi-Fi list, you see Wi-Fi with the suffix 5G at 5GHz, such as [XXX_5G], and Wi-Fi without the suffix at 2.4GHz.
If you change the Wi-Fi name, you can't use the suffix to determine if it's a 2.4GHz brand. Please go to the "Wireless" page of the router (the access method is usually on the label on the back of the router), find the 2.4GHz Settings page, change the Wi-Fi name (SSID) to "xxx-2.4G", and save the Settings; Find the 5GHz Settings page, change the Wi-Fi name (SSID) to "xxx-5G", and save the Settings; Once the name is changed, you can retrieve it again.
If the Wi-Fi name changed, all devices connected to the wireless router need to connect the Wi-Fi again, and if the password has not been changed, it will remain the same.
▶ 4. Why can't the device connect to Wi-Fi when it turns on automatically?
Please check in the following ways:
Whether there are too many devices in your home that need to be connected to the Internet, beyond the range that the router can load (ordinary home routers can only load less than 10 devices), so your devices cannot connect to the network;
Whether the network quality is unstable, so the device fails to connect to the network in time after the incoming call;
You can reconfigure the network for the device through the direct connection function.
If your problem still exists, provide APsystems with your device ID, We will arrange for technical support engineers to troubleshoot this issue.
▶ 5. Why can't I connect to my device via Bluetooth?
Please check in the following ways:
Pairing a Bluetooth device needs to be connected in our App, not the Bluetooth connection interface of the phone;
If you use an Android phone, you must open the App's location permission;
Whether the device is powered on;
Whether the distance between the Bluetooth gateway and the Bluetooth device is moderate (less than 3 meters), it is recommended to be as close as possible;
The Bluetooth lock function may be enabled on the device (Bluetooth is turned off). It is recommended to plug and unplug the AC side. The Bluetooth will be turned on for 15 minutes;
Check whether there are other users around using the Bluetooth device (the Bluetooth device can only be controlled and used by one user at the same time due to its characteristics, and other users can't connect to the device);
Our APP can only connect to our device.Bluetooth devices have certain private protocols, so it can't connect to other brands of devices.
If your problem still exists, provide APsystems with your device ID, We will arrange for technical support engineers to troubleshoot this issue.
▶ 6. The Bluetooth signal is weak or the communication quality is poor. What should I do?
Please check in the following ways:
Whether the distance between the Bluetooth gateway and the Bluetooth device is moderate (less than 3 meters), it is recommended to be as close as possible;
Check if there are any obstacles between the phone and the device.
Recommend you to connect the device when the signal is above 2 bars. If your problem still exists, provide APsystems with your device ID, We will arrange for technical support engineers to troubleshoot this issue.
▶ 7. How do I switch my device's Bluetooth functionality to manual?
We suggest that you proceed as follows:
Please log in to your account, enter the settings page for a single device, click Bluetooth Lock, and then click Open. Once turned on, the device Bluetooth will immediately turn off. If you do not have an account, please register an account first and bind it to your device.
If you failed to turn off the device' Bluetooth, provide APsystems with your account and device ID, we will arrange for technical support engineers to troubleshoot this issue.
▶ 8. If the device's Bluetooth is turned off, how can I turn it on?
We suggest that you proceed as follows:
After the device is turned on, Bluetooth will be turned on for 15 minutes;
After the device is turned on, plug and unplug the DC or AC side, and Bluetooth will be turned on for 15 minutes;
Log in to your account, enter the settings page for a single device, click Bluetooth lock, and then click close. Bluetooth will remain normally open, and it is not recommended to turn off Bluetooth lock. Normally open Bluetooth may cause data security issues.
If you failed to turn on the device' Bluetooth, provide APsystems with your account and device ID, we will arrange for technical support engineers to troubleshoot this issue.
There are no reviews yet.