APsystems® EZ1-M 800W Microinverter
State of the Art
The EZ1 series is the Wi-Fi version of the 3rd generation Dual Microinverter from APsystems, specifically designed for balconies and DIY systems. The EZ1 series features 2 input channels with independent MPPTs, capable of handling high input currents and providing high output power to accommodate today's high-performance modules.
The EZ1-M has a maximum output power of 800 watts. However, current legal regulations require balcony installations to have a maximum power limit of 600 watts. To comply with these regulations, APsystems has integrated a slider into the smartphone app, allowing manual adjustment of the output power between 600 and 800 watts. A change in the law permitting legal operation at 800 watts is expected for early 2024.
Users can directly connect to the EZ1 microinverter with their smartphones via Bluetooth, allowing them to access real-time data from their solar system. In addition to the direct connection, the EZ1 series can also be connected to a router via Wi-Fi to send data to cloud servers for remote monitoring. With the smartphone application, users can monitor the current solar production and production throughout the day in real-time.
Integrated NA Protection
As a crucial component of the photovoltaic system, the inverter plays a vital role in regulating current and voltage, ensuring the safety of the system and users. Network and system protection ensures the safe shutdown of the inverter in the event of a power outage or when disconnecting it from the power grid.
The APsystems EZ1-M is equipped with the necessary relay for network and system protection, ensuring compliance with all legal requirements.
The EZ1 microinverter is housed in a sturdy enclosure, providing excellent protection against external influences. The IP67 certification guarantees complete dust protection and resistance to temporary submersion. Therefore, the EZ1 is well-suited for balcony installations, even in various weather conditions.
- Speziell für Balkon- und DIY-Systeme: Plug-and-play-Installation
- Maximale dauerhafte Ausgangsleistung: 799W
- Unterstützt zwei PV-Module mit einer Eingangsleistung von 300-730Wp
- Geeignet für PV-Module mit hoher Eingangsstromstärke
- Maximale Zuverlässigkeit - Schutzklasse IP67 (staub- und wasserdicht)
- Integriertes Wi-Fi- und Bluetooth-Modul
- VDE Relais integriert
- AC plug: Betteri® AC connector
- DC-Stecker: Stäubli MC4 PV-ADBP4-S2&ADSP4-S2
- Standardmäßig 12 Jahre-Garantie
|Input Data (DC)
|Recommended Input Power (STC)
|Peak Power Tracking Voltage
|MPPT Voltage Range
|Maximum Input DC Voltage
|Maximum Input Current
||20V x 2
|Maximum Short Circuit Current
||25A x 2
|Output Data (AC)
|Maximum Continuous Output Power
|Nominal Output Voltage/Range 1
|Nominal Output Current
|Nominal Output Frequency/ Range 1
|Default Power Factor
|Nominal MPPT Efficiency
|Night Power Consumption
|Operating Ambient Temperature Range2
||-40°C bis +65°C
|Storage Temperature Range
||-40°C bis +65°C
||263mm x 218mm x 36.5mm
||263mm x 218mm x 37mm
|DC Connector Type
||Stäubli MC4 PV-ADBP4-S2&ADSP4-S2
||Natural Convection - No Fans
|Enclosure Environmental Rating
|Power Cord (Optional)
||5M as default
||Built-in Wi-Fi and Bluetooth
|Maximum units connected4
||High Frequency Transformers, Galvanically Isolated
||AP EasyPower APP
||EN 62109-1/-2; EN 61000-6-1/-2/-3/-4; EN 50549-1; DIN V VDE V 0126-1-1; VFR; UTE C15-712-1; CEI 0-21; UNE 217002; NTS; RD647; VDE-AR-N 4105
||12 Years Standard
1 Nominal voltage/frequency range can be extended beyond nominal if required by the utility.
2 The inverter may enter to power de-grade mode under poor ventilation and heat dissipation installation environment.
3 The factory setting could be 600VA as default and raise to 800VA after intallation according to the regulation adjustment.
4 For some countries it is limited to 1 because of the regulations.
enjoy solar® 5m-20m, 3*2,0mm² Connecting Cable for Micro Inverter with Betteri® BC01 Connector to Schuko
The connecting cable from enjoy solar® connects your micro inverter to a standard earthed socket (Schuko). The cable is equipped with the Betteri® BC01 connector on the inverter side and a Schuko plug type F on the socket side. This connecting cable is ready for use to connect the micro inverter to your power grid.
- 3 x 2.0mm² insulated PVC cable H05VV-F connecting cable
- Connector on the inverter side: Betteri® BC01
- Connector on the socket side: Schuko plug type F
- Rated voltage: 300/500V CE
- Operating temperature: 70°C
- Rated current (BC01): 20A
- TÜV tested according to PPP 59015A:2013