EPEVER®XTRA N G3 MPPT solar charge controller
The XTRA-N G3 series controllers – a state-of-the-art solution for solar charge control. With advanced MPPT algorithms for efficient energy tracking, as well as features like independent voltage regulation and comprehensive electronic protections, these controllers provide a reliable and durable solution for a wide range of solar applications – from RVs to household systems. Upgrade your solar system with the XTRA-N G3 series.
Special features
- High quality and low failure rate components of ST or IR to ensure the service life
- Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5%
- Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%
- Advanced MPPT control algorithm to minimize the lost rate and lost time
- Accurate recognizing and tracking of multi-peaks maximum power point
- Wider MPP(maximum power point) running voltage to optimize PV utilization
- Support multi battery types including lithium batteries
- Equipped with a stable self-activation function for the lithium battery
- Set the battery voltage parameters on the LCD
- Battery temperature compensation
- Limit the charging power & charging current to no higher than the rated value
- Real-time energy statistics function
- Charging power reduction automatically for over-temperature
- RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring
- Setting parameters via the PC software, APP, or remote meter
- Constant voltage output function
- Comprehensive electronic protections
- Multiple load work modes
- Dustproof and waterproof design with IP33 enclosure
- Ultra-quiet, low-power consumption design
- Operation at full load without charging power reduced in the working temperature range
Technical specifications
Modle |
XTRA4210N |
System nominal voltage |
12/24VDC① Auto |
Nominal charging current |
40A |
Nominal discharge current |
40A |
Battery voltage range |
8 ~ 31V |
Max. PV open circuit voltage |
100V(At minimum operating environment temperature) 92V(At 25℃ environment temperature)
|
MPPT voltage range |
Battery voltage + 2V ~ 72V |
Max. PV input power |
520W / 12V 1040W / 24V |
Maximum Conversion Efficiency
|
98.6% |
Maximum Load Efficiency
|
96.5% |
Static Losses (Enable the com. port)
|
≤15mA(12V); ≤9mA(24V) |
Static Losses (Disable the com. port)
|
≤8mA(12V) ≤5mA(24V)
|
Voltage drop of the discharge circuit |
≤0.23V |
Temperature Compensation②
|
-3mV / ° C / 2V (standard) |
RS485 Port
|
5VDC/200mA(RJ45)
|
LCD Backlight Time
|
Default: 60S, Range: 0~999S(0S: the backlight is ON all the time)
|
Working environment temperature③
|
-25℃~+50℃
|
Storage Temperature Range
|
-20℃~+70℃
|
Pollution Degree
|
PD2
|
Dimension
|
255 × 185 × 67,8mm
|
Weight
|
1.72kg
|
Relative Humidity
|
< 95 % (N.C.)
|
① Whenalithiumbatteryisused,thesystemvoltagecan’tbeidentifiedautomatically.
② Whenalithiumbatteryisused,thetemperaturecompensationcoefficientmustbe"0"andcan’tbechanged.
③ Thecontroller can fully load working in the work temperature range. When the internal temperature reaches 81℃, the reducing charging power mode is turned on.
EPEVER®MT52 Display Compatible with Charge Controller MPPT XTRA,Trace AN, BN, Tracer-AN G3, XTRA-N G3; PWM LS-B, VS-BN Series
Compatible with:
- PWM charge controller: LS-B, VS-BN
-
MPPT charge controller: XTRA, Tracer-AN, Tracer-BN, Triron, Tracer-AN G3, XTRA-N G3.
The MT52 remote meter, compatible with controllers featuring RS485 communication, enables real-time monitoring of the controller's operation and parameter programming. Key features include easy installation and operation, real-time display of fault alarms, local reading of parameters, direct power supply from the controller, and an RJ45 communication port.
Special features
- Automatic identify and display the type, model and relevant parameter data of controllers
- Real-time display the operational data and working status of the connection devices in digital,
- graphic and textual forms by a large-screen multifunction LCD
- Direct, convenient and rapid operation of six navigation function keys
- Both data and power flowing on the same lead, no need for external power
- Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters
- Real-time display and acoustic alarm of failure information of the connection devices
- Longer communication distance based on RS485
- Battery type selection: Gel, lead acid and user-defined (for example lithium battery)
- Adjustable low-temperature cutoff for charging and discharging of lithium batteries
Technical specifications
Modle |
MT52 |
Self-consumption
|
Backlight ON < 23mA
Backlight OFF < 15mA
|
Faceplate dimension
|
98 mm × 98 mm
|
Frame dimension
|
114 mm × 114 mm
|
Communication port
|
RJ45
|
Communication cable (m)
|
Standard: 2m, Longest: 50m
|
Net weight
|
Simple package: 0.23Kg
Standard package: 0.32kg
|
Environment temperature
|
-20℃ to +70℃
|
Product safety information
Manufacturer information:
SolarV GmbH
Am Kronberger Hang 2
Hessen
Schwalbach am Taunus, Deutschland, 65824
info@solarv.de
www.solarv.de
There are no reviews yet.