All efforts are made to increase the power of PV-system. EXLUSIVELY SOLD BY SOLARV!The new enjoy solar® PERC (Passivated Emitter and Rear Cell) monocrystalline solar module with 9 busbars (9BB) increases the cell size from 158.75mm * 158.75mm to 166mm * 166mm, thereby the cell efficiency considerably increased up to 22.9%. Because of the improvement in the power efficiency, the installation area and the costs are reduced. The 9BB has shorter and narrower grid lines that result in a higher current. In addition, the service life of the solar panel will be extended by PERC and Anti-LeTID technology.
Special features
- Construction with 166mm * 166mm monocrystalline PERC cells
- With 9 multi-busbars, less resistance and more stability
- Increased cell efficiency up to 22.9%
- Less gaps between the solar cells and thinner busbar design
- More solid energy generation with the added copper and excellent performance in case of the low light
- Reduced installation area and costs
- 1pcs integrated bypass diode
- Surface made of hardened ESG solar glass with weatherproof coating
- Unique, extra robust frame made of anodized aluminum
- 90 cm long solar cable; 4 mm² connected with MC-4 connectors
- TÜV certified according to standards IEC61215, IEC61730
- Plus tolerance guarantee (+ 3%), performance guarantee up to 10 years with 90% and up to 25 years with 80%
Electrical characteristics
| Product code |
Eco Line ES100M36 |
| Item number |
1160100 |
| EAN Code |
4260558573166 |
| Cells |
Monocrystalline Perc |
| Max. power(Pmax) |
100W |
| Max. voltage (Vmp) |
18.5V |
| Max. current (Imp) |
5.42A |
| Open circuit voltage (Voc) |
22.8V |
| Short circuit current (Isc) |
5.84A |
| Temperature coefficient of Voc |
-0.36%/K |
| Temperature coefficient of Isc |
0.05%/K |
| Temperature coefficient of power |
-0.44%/K |
| Normal operating cell temperature |
44+/-2℃ |
| Operating temperature |
-40 ~ +85℃ |
| Max. System voltage |
1000VDC |
| Power tolerance |
0 ~ +3% |
| Junction Box |
Waterproof IP65,1000VDC |
| Bypass Diodes |
1 pcs |
| Module Dimension |
1065 * 540 * 35 mm |
| Module weight |
6.8 kg |
* Measured at standard test conditions: irradiance 1000 W/m², air mass 1.5 spectum, temperature 25℃, Electrical parameters vary by -5% to +5%
Product safety information
Manufacturer information:
SolarV GmbH
Am Kronberger Hang 2
Hessen
Schwalbach am Taunus, Deutschland, 65824
info@solarv.de
www.solarv.de
How many bypass diode are installed in solar panel?
Solar panel 10W-80W has one bypass diode; solar panel 100W-320W has two bypass diodes. Exception: 1100100 (100W) has only one diode and 1160105 (XL 100W) has two diodes.
What is the function of the bypass diode?
The bypass diodes’ function is to eliminate the hot-spot phenomena which can damage PV cells and even cause fire if the light hitting the surface of the PV cells in a module is not uniform.
How does shading affect the performance of solar panel?
When solar panels are exposed to shady conditions, their efficiency drops, and their performance suffers as a result. Environmental obstructions such as trees or nearby buildings, clouds, self-shading between panels in parallel rows, dirt, dust, and various other trash such as bird droppings, all cause shading. These shading effects may be static as a result of the obstruction’s location, or dynamic in certain situations, such as a shadow cast by moving clouds. Therefore, eliminating solar shading problems is the most effective way to avoid them.
How can I check the power of my panel?
Measure the open circuit voltage and short circuit current of your solar panel with multimeter and compare the result with the technical data of the panel. Please also note that the calculated values from technical data are ideal values and depend on various factors such as temperature, angle, compass direction, irradiance, air mass, humidity, solar radiation (impairment e.g., by high fog), resistances in cables, connectors, and charge controllers, etc.
Can different solar panels be connected?
Solar panels with the same (or slightly deviated value +/- 1V) voltage (V) but different power (W) can be connected in parallel without any problem.
Solar panels of different voltage and power must not be connected in parallel, because the solar panel with the lowest voltage determines the voltage output of the whole array. When connecting solar panels together in parallel it is important that they ALL have the same nominal voltage value, but it is not necessary that they have the same ampere value.
Solar panels with the same (or slightly deviated value +/- 1A) current (A) but different power (W) can be connected in series without any problem.
Solar panels of different current and power should not be connected in series, because the solar panel with the lowest current determines the current output of the whole array.
In fact, we do not recommend a parallel/series connection of the different solar modules, as a loss of power cannot be avoided in any case.
There are no reviews yet.
