Luxen® monocrystalline Full Black 410W solar panel
The Luxpower 410W Full Black solar module of the Series 5 from Luxen Solar is a monocrystalline and modern module with gallium-doped technology and a 108 half-cell layout. Thanks to the multi-busbar technology, three integrated bypass diodes and the two-part arrangement of the cell strings, this solar panel offers high hot-spot resistance in solo operation and a solid current yield in strings with many modules, even in poor light and partial shade. The noble full-black design makes it a good choice when it comes to finding a solar cell for roof systems on residential buildings or for balcony power plants and many other applications.
Special Features
- High-quality A-grade solar cells(182mm), higher efficiency thanks to the 10 busbars (10BB) even in poor light conditions
- Surface made of hardened ESG solar glass with a weatherproof coating
- Corrosion-resistant aluminum frame for extended outdoor use with pre-drilled mounting holes
- IP68 junction box with 120cm long 4mm² double insulated solar cable and MC4 connector
- 3 bypass diode – minimized power drop in shading
- SGS-TÜV Saar tested according to applicable standards
- Guarantee of plus tolerance (0~+3%)
- For all needs related to a self-sufficient and mobile energy supply
Technical Specifications
| manufacturer model |
Luxen LNVB-410M |
| item number |
119B410 |
| Max Power (Pm) |
410W* |
| Max Voltage (Vmp) |
31.83V |
| Max Current (Imp) |
12.88A |
| Open Circuit Voltage (Voc) |
37.98V |
| Short circuit current (Isc) |
13.77A |
| operating temperatur |
-40°C ~ +85°C |
| Max. mains voltage |
1500VDC |
| tolerance |
+3% |
| Weight |
21.0kg |
| Dimensions |
1722 * 1134 * 35mm |
*Values according to STC conditions (E = 1000 W/m², Tc = 25 °C, AM = 1.5)
APsystems® EZ1-M 800W Microinverter
State of the Art
The EZ1 series is the Wi-Fi version of the 3rd generation Dual Microinverter from APsystems, specifically designed for balconies and DIY systems. The EZ1 series features 2 input channels with independent MPPTs, capable of handling high input currents and providing high output power to accommodate today's high-performance modules.
The EZ1-M has a maximum output power of 800 watts. However, current legal regulations require balcony installations to have a maximum power limit of 600 watts. To comply with these regulations, APsystems has integrated a slider into the smartphone app, allowing manual adjustment of the output power between 600 and 800 watts. A change in the law permitting legal operation at 800 watts is expected for early 2024.
Fully Connected
Users can directly connect to the EZ1 microinverter with their smartphones via Bluetooth, allowing them to access real-time data from their solar system. In addition to the direct connection, the EZ1 series can also be connected to a router via Wi-Fi to send data to cloud servers for remote monitoring. With the smartphone application, users can monitor the current solar production and production throughout the day in real-time.
Integrated NA Protection
As a crucial component of the photovoltaic system, the inverter plays a vital role in regulating current and voltage, ensuring the safety of the system and users. Network and system protection ensures the safe shutdown of the inverter in the event of a power outage or when disconnecting it from the power grid.
The APsystems EZ1-M is equipped with the necessary relay for network and system protection, ensuring compliance with all legal requirements.
Robust Construction
The EZ1 microinverter is housed in a sturdy enclosure, providing excellent protection against external influences. The IP67 certification guarantees complete dust protection and resistance to temporary submersion. Therefore, the EZ1 is well-suited for balcony installations, even in various weather conditions.
Special features:
- Specially designed for balcony and DIY systems: Plug-and-play Installation
- Maximum continuous output power: 799W
- Supports two PV modules with an input power of 300-730W
- Suitable for PV modules with high input currents
- Maximum reliability - IP67 protection class (dust and waterproof)
- Integrated Wi-Fi and Bluetooth module
- Integrated VDE relay
- AC connector: Exceedconn® AC connector
- DC connector: Stäubli MC4 PV-ADBP4-S2&ADSP4-S2
- 12-year warranty as standard
Technical Specifications
| Model |
EZ1-M |
| Input Data (DC) |
|
| Recommended Input Power (STC) |
300Wp-730Wp+ |
| Peak Power Tracking Voltage |
28V-45V |
| MPPT Voltage Range |
16-60V |
| Maximum Input DC Voltage |
60V |
| Maximum Input Current |
20V x 2 |
| Maximum Short Circuit Current |
25A x 2 |
| Output Data (AC) |
|
| Maximum Continuous Output Power |
600VA3/799VA |
| Nominal Output Voltage/Range 1
|
230V/184V-253V |
| Nominal Output Current |
2.6A3/3.5A |
| Nominal Output Frequency/ Range 1
|
50Hz/48Hz-51Hz |
| Default Power Factor |
0.99 |
| Efficiency |
|
| Peak Efficiency |
96.7% |
| Nominal MPPT Efficiency |
99.5% |
| Night Power Consumption |
20mW |
| Mechanical data |
|
| Operating Ambient Temperature Range2
|
-40°C to +65°C |
| Storage Temperature Range |
-40°C to +65°C |
| Dimension (mm) |
263mm x 218mm x 36.5mm |
| Weight (kg) |
2.8 |
| DC Connector Type |
Stäubli MC4 PV-ADBP4-S2&ADSP4-S2 |
| Cooling System |
Natural Convection - No Fans |
| Enclosure Environmental Rating |
IP67 |
| Power Cord (Optional) |
|
| Wire Size |
1.5mm² |
| Cable Length |
5M as default |
| Plug Type |
Schuko |
| Featurese |
|
| Communication |
Built-in Wi-Fi and Bluetooth |
| Maximum units connected4
|
2 |
| Isolation Design |
High Frequency Transformers, Galvanically Isolated |
| Energy Management |
AP EasyPower APP |
| Compliance |
EN 62109-1/-2; EN 61000-6-1/-2/-3/-4; EN 50549-1; DIN V VDE V 0126-1-1; VFR; UTE C15-712-1; CEI 0-21; UNE 217002; NTS; RD647; VDE-AR-N 4105 |
| Warranty |
12 Years Standard |
1 Nominal voltage/frequency range can be extended beyond nominal if required by the utility.
2 The inverter may enter to power de-grade mode under poor ventilation and heat dissipation installation environment.
3 The factory setting could be 600VA as default and raise to 800VA after intallation according to the regulation adjustment.
4 For some countries it is limited to 1 because of the regulations.
APsystems® 5m Connecting Cable for Micro Inverter with Exceedconn Connector to Schuko
The connection cable from APSystems for EZ1 microinverters with Exceedconn connector. 5m long connection cable between APSystems EZ1-M with IP68-protected special plug in the input and SchuKo sockets in the output with 3x1.5mm² cross section and UV-resistant cover.
Special features
- 3 x 1.5mm² H07RN-F, rubber hose cable
- Connector on the inverter side: Exceedconn EP030-1224-00
- Connector on the socket side: Schuko plug type F
- Rated voltage: 750V
- Operating temperature: -30 to 60°C
- Rated current: 16A
- CE, TÜV verified, VDE 40015173 H07RN-F tested
