EPEVER® IPT-Pure Sine Wave Inverter 12VDC to 230VAC|350W,500W,1000W,1500W,2000W,3000W

EPEVER® IPT-Pure Sine Wave Inverter 12VDC to 230VAC|350W,500W,1000W,1500W,2000W,3000W

SKU: 312V
Category: IPT Series
Manufacturers: EPEVER

Pure sine wave output
Input to output electrical isolation
Output power factor up to 1
Input Protection: Low-voltage, Over-voltage
Output Protection: Overload, Short circuit, Overheating
RS485 com. port to realize remote monitoring
External switch design, matched with EPEVER products, to expand inverter control function and reduce power consumption
EN/EC62109-1/2, EN61000-6-2/4, and FCC approved

Continuous output power

from

177,95 €

incl. 19% VAT , plus

umsatzsteuerfreie Lieferung möglich

Mit dem beschlossenen Jahressteuergesetz (JStG) 2022 wurde den Ausbau von Photovoltaikanlagen für Privatkunden vergünstigt, konkret ist Nullsteuersatz mit Vorsteuerabzug für die Lieferung und Installation von Photovoltaikanlagen auf oder in der Nähe von Wohngebäuden bis 30KW- §12 Abs. 3 Nr. 1 UstG (neu). Die Befreiung von der Umsatzsteuer ab 01.01.2023 gilt auch für Teile unseres Sortiments, wie z. B. Photovoltaikmodule, Wechselrichter oder auch Batteriespeicher.

Low stock level

This item has variations. Please select the requested variation.

The IPT series, a high-frequency sine wave inverter, adopts a fully digital intelligent design and voltage-current dual closed-loop control algorithm. Featured with fast response, high conversion efficiency, low Total Harmonic Distortion(THD), and high reliability running, this series can be widely used in the DC-AC off-grid systems (such as vehicle systems, security monitoring systems, emergency lighting systems, household power systems, field power systems, and other systems requiring higher power quality).

Special features

Pure sine wave output
Input to output electrical isolation
Output power factor up to 1
Input Protection: Low-voltage, Over-voltage
Output Protection: Overload, Short circuit, Overheating
RS485 com. port to realize remote monitoring
External switch design, matched with EPEVER products, to expand inverter control function and reduce power consumption
EN/EC62109-1/2, EN61000-6-2/4, and FCC approved

Technical Specifications

Model	IPT1000-42	IPT1500-42	IPT2000-42	IPT3000-42	IPT4000-42	IPT5000-42
EAN Code	4260558574743	4260558574774	4260558574675	4260558574668	4260558574682	4260558574699
Article number	3421000	3421500	3422000	3423000	3424000	3425000
Continuous output power	1000W	1500W	2000W	3000W	4000W	5000W
Surge power	2000W@5S	3000W@5S	4000W@5S	6000W@5S	8000W@5S	8000W@5S
Surge current when power on¹	< 35A	< 50A	< 50A	< 65A	< 65A	< 65A
Output voltage	220VAC/230VAC/240VAC(±3%)	220VAC (±3%); 230VAC (-6%~+3%); 240VAC (-9%~+3%)
Output frequency	50/60Hz ± 0.2%
Output wave	Pure Sine Wave
Output distortion THD	THD ≤ 3% (Resistive load)
Load power factor	0.2 ~ 1 (Load power ≤ Continuous output power)
Rated input voltage	48VDC
Input voltage range	43.2 ~ 64.0VDC
Rated output efficiency²	> 92.0%	> 92.5%	> 92.5%	> 92.5%	> 91.0%	> 91.0%
Max. output efficiency³	> 93.0% (40% loads)	> 94.0% (30% loads)	> 94.5% (30% loads)	> 94.5% (30% loads)	> 94.0% (30% loads)	> 94.0% (30% loads)
Idle current	< 0.10A	< 0.10A	< 0.10A	< 0.10A	< 0.10A	< 0.10A
No-load current	< 0.4A	< 0.5A	< 0.5A	< 0.5A	< 0.6A	< 0.8A
RS485 com. port	5VDC/200mA
Mechanical parameters
Input terminal	M6	M6	M6	M6	M6	M6
Dimension (L x W x H)mm	332 × 228 × 118	387 × 228 × 118	421 × 228 × 118	491 × 228 × 118	516 × 228 × 118	532 × 228 × 118
Mounting size (L x W)mm	306 × 145	361 × 145	395 × 145	465 × 145	490 × 145	505 × 145
Mounting hole size	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm
Net Weight	4.5kg	5.2kg	5.8kg	6.8kg	7.8kg	8.5kg
Environment parameters
Working temperature	-20℃ ~ +60℃ (Refer to the Derating Curve)
Storage temperature	-35 ℃ ~ +70 ℃
Relative humidity	≤ 95% (N.C.)
Enclosure	IP20
Altitude	< 5000m (If the altitude exceeds 1000 meters, the rated power will be reduced according to IEC62040.)
Certification
Safety	EN/IEC62109-1, UL458 (Products with 12/24V input voltage support), CSA C22.2#107.1
EMC(Electromagnetic compatibility)	EN61000-6-2/EN61000-6-4,FCC 47 CFR Part 15, Subpart A
RoHS	IEC62321-3-1

1 The "Surge current when power on" parameter is for the customized products with an anti-surge function (whose product model has "S"). For other products, the actual surge current prevails.
2 It means the rated output efficiency when the load power equals the "continuous output power" under the rated DC input voltage.
3 It means the max. output efficiency when the inverter is connected with different loads under the rated DC input voltage.