EPEVER UPower-Hi Hybrid Inverter (Inverter / Charger) is the new generation of UPower Hybrid Inverter. supports diversified energy management modes on solar/utility/generator charging, and utility/inverter power supply to the AC loads. To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can raise the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy. Due to the improvement of protection functions against overcurrent and reverse polarity, the UPower-Hi inverter supports the lithium battery system.
Special features :
- Supports the battery mode or non-battery mode
- Surge current and reverse connection protections to support the lithium battery system perfectly
- High tracking efficiency of MPPT no less than 99.5%
- PFC technology which achieves a high power factor of AC to DC charging and reduces the usage of power grid capacity
- Advanced SPWM technology and pure sine wave output
- Three charging modes: Solar only, Solar priority, Utility & Solar
- Two AC output modes: Utility priority and Inverter priority
- Optional WiFi or GPRS Remote control via the RS485 isolated communication port
- BMS-Link port and optional BMS-Link communication protocol module
- Configurable battery charging current, discharging current and grid charging current
- AC OUT button to control the AC output directly
- Multiple LED indicators to dynamic display the status
- Supports cold start and soft start
- Comprehensive electronic protection features
- Battery types: AGM,GEL,FLD,LFP8/LFP15/LFP16,LNCM7/LNCM14
- 2 year product guarantee
Technical Specifications
| Model |
UP3000-HM10022 |
| Item number |
100223000 |
| EAN Code |
4260558573555 |
| Norminal battery voltage |
24VDC |
| Battery input voltage |
21,6~ 32VDC |
| Max. battery charging current |
100A |
| Inverter output |
|
| Continuous output power |
3000W |
| Max. surge power(3S) |
6000W |
| Output voltage range |
220VAC(-6% ~ +3%),230VAC(-10% ~ +3%) |
| Output frequency |
50/60Hz ± 0,2% |
| Output wave |
Pure Sine Wave |
| Load power factor |
0,2-1(Load VA = Continuous output power) |
| Distortion THD |
THD=3%(Resistive load) |
| Utility charging |
|
| Utility input voltage |
176VAC ~ 264VAC(Default) 90VAC ~ 280VAC(Programmable) |
| Utility input frequency |
40 ~ 65Hz |
| Max. utility charge current |
80A(When the Utility input voltage is 90VAC~180VAC,the Max. utility charge current is 40A) |
| Solar Charging |
|
| Max. PV open circuit voltage |
450V? 395V? |
| MPPT voltage range |
80 ~ 350V |
| Max. PV input power |
4000W |
| Max. PV charging power |
2875W |
| Max. PV charging current |
100A |
| Equalize charging voltage |
29,2V(AGM default) |
| Boost charging voltage |
28,8V(AGM default) |
| Float charging voltage |
27,6V(AGM default) |
| Low voltage disconnect voltage |
21,6V(AGM default) |
| Tracking efficiency |
=99.5% |
| Temp. compensate coefficient |
-3mV/?/2V(default) |
| Gerneral |
|
| Surge current |
60A |
| Zero load consumption |
<1,8A (without PV and utility connection, turn on the load output) |
| Standby current |
<1,2A (without PV and utility connection, turn off the load output) |
| Dimension (H x W x D) |
642,5 * 381,6 * 149mm |
| Mounting size |
620 * 300mm |
| Mounting hole size |
F10mm |
| Net Weight |
19kg |
| Enclosure |
IP30 |
| Relative humidity |
< 95% (N.C.) |
| Arbeitstemperatur |
-20? ~ 50? |
| Storage temperature |
-25? ~ 60? |
| Altitude |
<5000m (If the altitude exceeds 1000 meters, the actual output power is reduced according to IEC62040.) |
? At minimum operating environment temperature? At 25? environment temperature
Product safety information
Manufacturer information:
SolarV GmbH
Am Kronberger Hang 2
Hessen
Schwalbach am Taunus, Deutschland, 65824
info@solarv.de
www.solarv.de
Does the EPEVER Hybrid Inverter support lithium battery?
The UPower series Hybrid Inverter must not be used with lithium battery, and even though in “USER” modus, the parameter of lithium battery cannot be set. Only the UPower Hi Series Inverter support lithium battery.
Must hybrid inverter be grounded?
If the utility is connected to the inverter (as the only input), a ground connection must be made. Nevertheless, we recommend to ground the inverter even if only the solar panels charge the battery. First of all, you must ground your off-grid system, then connect this ground to the ground terminal of the inverter. Details can be found in the manual.
How long is the manufacturer's warranty for charge controllers?
2 years
There are no reviews yet.
