Delivery:
- 4mm² or 6mm² or 10mm² in red or black 1x Ring 100 Meter
Features:
- In a solar power system of rated voltage U0=1.5KV;
- PV cables are used for the connect between solar panels and inverters.
- Suitable for MC4 adapter (male and female).
- Applicable to all common connectors
- E-beam cross-linked compounds
- High resistance against UV, ozone and hydrolysis and weather resistant
- High temperature resistance; materials will not melt or flow
- Flexibility under cold conditions
- Long suable life, expected suable life over 25 years
Technical dataStructure
- Conductor: Soft tinned annealed copper according to IEC 60228, class 5
- Insulation: XLPE, flame retardant, halogen free, E-beam crosslinked compounds
- Jacket: XLPE, flame retardant, halogen free, E-beam cross-linked compounds UV and ozone resistant, black/white marking
- Jacket color: red or black; other colors (custom production required)
Thermal Performance
- Operation temperature: -40℃ ～ +120℃
- Ambient temperature: -40℃ ～ +90℃
- Maximum short circuit temperature: 250℃
Bending radius
- Fixed setting: >4 × ø
- Moves on occasion: >5 × ø
Material characteristics / standard
- Fireproof performance: EN 60332-1-2
- Smoke emission: EN 61034-1; EN 61034-2
- Low fire load: DIN 51900
- Approval: TÜV EN50618
- Applied Standard: TÜV EN50618
Electrical performance
- Rated voltage: U0=1.5kV
- DC test voltage: 6.5kV AC 5min
| Artide Number |
510××04 |
510××06 |
510××10 |
| conductor cross-section (mm2)
|
1×4.0 |
1×6.0 |
1×10.0 |
| N/mm |
56/0.28 |
84/0.28 |
80/0.4 |
| Insulation Thickness
|
0.95 |
1.02 |
0.7 |
| Jacket Thickness(mm)
|
0.8 |
0.9 |
0.8 |
| OD(mm) |
6.0 |
6.87 |
7.13 |
| Max.mΩ/m |
5.09 |
3.39 |
1.95 |
| Ca.mΩ/m |
4.85 |
3.28 |
1.75 |
| Ampacity(A) |
55 |
70 |
98 |
1) 4mm² or 6mm² ?
If your cable is quite short and your rated current is below 30A, you can use 4mm². Otherwise, 6mm² is better.
2) When is a MC4 connector needed?
When you extend the cable and also when you want to connect the modules in parallel.
3) When is a Y-connector needed?
When you connect the modules in parallel.
4) How many MC4 connectors are needed?
If you want to extend the cable of one module, then you need only one MC4 connector. If you want to connect 2/ 3 / 4 / 5 modules in parallel, then you need 1 / 3 / 4 / 5 plugs from these connectors.
5) How many Y connectors are needed?
If you want to connect 2 / 3 / 4 / 5 modules in parallel, then you need 1 / 3 / 4 plugs from these connectors.
6) How many connectors are supplied?
Always one plus and one minus plug.
7) Which cable should be used?
MC4 connector and cable should have the same size.
There are no reviews yet.
