Features:
- PV cables for use in a solar power system of rated voltage U0=1.5KV
- Suitable for MC4 adapter (male and female).
- Applicable to all common connectors
- E-beam cross-linked compounds
- High resistance against UV, ozone and hydrolysis and weather resistant
- High temperature resistance; materials will not melt or flow
- Flexibility under cold conditions
- Long life span of over 25 years
Technical dataStructure
- Conductor: Soft tinned annealed copper according to IEC 60228, class 5
- Insulation: XLPE, flame retardant, halogen free, E-beam crosslinked compounds
- Jacket: XLPE, flame retardant, halogen free, E-beam cross-linked compounds UV and ozone resistant, black/white marking
- Jacket color: red or black; other colors (custom production required)
Thermal Performance
- Operation temperature: -40℃ ～ +120℃
- Ambient temperature: -40℃ ～ +90℃
- Maximum short circuit temperature: 250℃
Bending radius
- Fixed setting: >4 × ø
- Moves on occasion: >5 × ø
Material characteristics / standard
- Fireproof performance: EN 60332-1-2
- Smoke emission: EN 61034-1; EN 61034-2
- Low fire load: DIN 51900
- Approval: TÜV EN50618
- Applied Standard: TÜV EN50618
Electrical performance
- Rated voltage: U0=1.5kV
- DC test voltage: 6.5kV AC 5min
| Artide Number |
510××04 |
510××06 |
510××10 |
| conductor cross-section (mm2)
|
1×4.0 |
1×6.0 |
1×10.0 |
| N/mm |
56/0.28 |
84/0.28 |
80/0.4 |
| Insulation Thickness
|
0.95 |
1.02 |
0.7 |
| Jacket Thickness(mm)
|
0.8 |
0.9 |
0.8 |
| OD(mm) |
6.0 |
6.87 |
7.13 |
| Max.mΩ/m |
5.09 |
3.39 |
1.95 |
| Ca.mΩ/m |
4.85 |
3.28 |
1.75 |
| Ampacity(A) |
55 |
70 |
98 |
FAQ：
1) 4mm² or 6mm²?
-If your cable is quite short and your rated current is below 30A, you can use 4mm². Otherwise, 6mm² is better.
2) When is a MC4 connector needed?
-When you extend the cable and also when you want to connect the modules in parallel.
3) When is a Y-connector needed?
-When you connect the modules in parallel.
4) How many MC4 connectors are needed?
-If you want to extend the cable of one module, then you need only one MC4 connector. If you want to connect 2/ 3 / 4 / 5 modules in parallel, then you need 1 / 3 / 4 / 5 plugs from these connectors.
5) How many Y connectors are needed?
-If you want to connect 2 / 3 / 4 / 5 modules in parallel, then you need 1 / 3 / 4 plugs from these connectors.
6) How many connectors are supplied?
-Always one plus and one minus plug.
7) Which cable should be used?
-MC4 connector and cable should have the same size.
