EPEVER® UP2000-HM6022 Inverter Charger PV 60A, AC 60A, 24V - (0% Mwst)

EPEVER® UP2000-HM6022 Inverter Charger PV 60A, AC 60A, 24V - (0% Mwst)

SKU: 00-60222000

Built with classic 125mm (5 inch) monocrystalline cells
90cm long 4mm² solar cable with MC4 connector
Two integrated bypass diode - minimized power loss during shading
TÜV certified
Surface made of tempered toughened solar glass with weatherproof coating
Unique extra robust frame in anodized aluminum
High tracking efficiency of MPPT no less than 99.5%

559,62 €

incl. 0% VAT , plus

Available immediately

EPEVER UPower-Hi Hybrid Inverter (Wechselrichter / Ladegerät) ist die neue Generation von UPower Hybrid Inverter. Er unterstützt das verschiedene Energieverwaltungsmodi für das Laden von Solar-, Netz- und Generatorstrom sowie die Versorgung der Wechselstromverbraucher mit Netz- und Wechselrichterstrom. Um die Solarenergienutzung zu maximieren, können die Benutzer die Energiequellen entsprechend dem tatsächlichen Bedarf auswählen und das Versorgungsunternehmen flexibel als Ergänzung nutzen. Dieses Wechselrichter-Ladegerät kann die garantierte Stromversorgungsrate des Systems erhöhen, was für Solarenergie-, Versorgungs-/Ölgenerator-Hybridsysteme geeignet ist. Es zielt darauf ab, den Benutzern hochwertige, hochstabile und hochzuverlässige elektrische Energie zu liefern. Dank der Verbesserung von Schutzfunktionen gegen Überstrom und Verpolung unterstützt der UPower-Hi Inverter das Lithiumbatteriesystem.

Besondere Merkmale:

Full intelligent digital energy storage equipment
Supports the battery mode or non-battery mode
Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously
Surge and reverse connection protections to support the lithium battery system perfectly
Advanced SPWM technology and pure sine wave output
PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage
Full digital double closed-loop control
High tracking efficiency of MPPT no less than 99.5%
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
Self-learning SOC display function
Multiple LED indicators to dynamic display the status
AC OUT button to control the AC output directly
4.2 inches LCD to monitor and modify system parameters
Remote temperature compensation for batteries
Optional WiFi or GPRS Remote control by the RS485 isolated com. port
Optional BMS-Link port, taking the charging and discharging control from BMS
Customized charging current and discharging limited current
Supports cold start and soft start
Comprehensive electronic protection features

Technische Daten

Model	UP2000 HM6022
EAN Code	4260558573562
Item number	60222000
Rated battery voltage	24VDC
Battery input voltage	21,6 ~ 32VDC
Max. battery charging current	60A
Inverter output
Continuous output power	2000W
Max. surge power(3S)	4000W
Output voltage range	220VAC(-6% ~ +3%),230VAC(-10% ~ +3%)
Output frequency	50/60Hz ± 0,2%
Output wave	Pure Sine Wave
Load power factor	0,2-1(Load power = Continuous output power)
Distortion THD	THD=3%( Resistive load)
Utility charging
Utility input voltage	176VAC ~ 264VAC((Default) 90VAC ~ 280VAC(Programmable)
Utility input frequency	40 ~ 65Hz
Max. utility charge current	60A((When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 30A)
Solar charging
Max. PV open circuit voltage	450V? 395V?
MPPT voltage range	80 ~ 350V
Max. PV input power	2500W (Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter 3.4 Operating mode for details.)
Max. PV charging power	1725W
Max. PV charging current	60A
Equalize charging voltage	29,2V(AGM Standard)
Boost charging voltage	28,8V(AGM Standard)
Float charging voltage	27,6V(AGM Standard)
Low voltage disconnect voltage	21,6(AGM Standard)
Tracking efficiency	=99.5%
Temp. compensate coefficient	-3mV/?/2V(Standard)
General
Surge current	50A
Zero load consumption	<1,8A (without PV and utility connection, turn on the load output)
Standby current	<1,2A(without PV and utility connection, turn off the load output)
Mechanical Parameters
Dimension(H x W x D)	607,5x381,6x127mm
Mounting size	585*300mm
Mounting hole size	F10mm
Net Weight	15kg
Environment Parameters
Enclosure	IP30
Relative humidity	< 95% (N.C.)
Environment temperature	-20? ~ 50?
Storage temperature	-25? ~ 60?
Altitude	<5000m ((If the altitude exceeds 1000 meters, the actual output power is reduced according to IEC62040.)

? Atminimumoperatingenvironmenttemperature? At25? environmenttemperature*Values according to STC conditions (E=1000 W/sq.m, Tc=25 °C, AM=1,5)

Does the EPEVER Hybrid Inverter support lithium battery?

The UPower series Hybrid Inverter must not be used with lithium battery, and even though in “USER” modus, the parameter of lithium battery cannot be set. Only the UPower Hi Series Inverter support lithium battery.

Must hybrid inverter be grounded?

If the utility is connected to the inverter (as the only input), a ground connection must be made. Nevertheless, we recommend to ground the inverter even if only the solar panels charge the battery. First of all, you must ground your off-grid system, then connect this ground to the ground terminal of the inverter. Details can be found in the manual.

How long is the manufacturer's warranty for charge controllers?

2 years

There are no reviews yet.