EPEVER® UP5000-HM8042 Inverter Charger PV 80A, AC 60A, 48V - (0% Mwst)

EPEVER® UP5000-HM8042 Inverter Charger PV 80A, AC 60A, 48V - (0% Mwst)

SKU: 00-80425000
GTIN: 4260558573500

Supports the battery mode or non-battery mode
Surge current and reverse connection protections to support the lithium battery system perfectly
High tracking efficiency of MPPT no less than 99.5%
Advanced SPWM technology and pure sine wave output
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority

Online reading and download:User manual – UPower-Hi Series Inverter

480,63 €

incl. 0% VAT , plus

Old price: 691,55 €

Currently out of stock

EPEVER UPower-Hi Hybrid Inverter (Inverter / Charger) is the new generation of UPower Hybrid Inverter. supports diversified energy management modes on solar/utility/generator charging, and utility/inverter power supply to the AC loads. To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can raise the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy. Due to the improvement of protection functions against overcurrent and reverse polarity, the UPower-Hi inverter supports the lithium battery system.

Special features :

Supports the battery mode or non-battery mode
Surge current and reverse connection protections to support the lithium battery system perfectly
High tracking efficiency of MPPT no less than 99.5%
PFC technology which achieves a high power factor of AC to DC charging and reduces the usage of power grid capacity
Advanced SPWM technology and pure sine wave output
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
Optional WiFi or GPRS Remote control via the RS485 isolated communication port
BMS-Link port and optional BMS-Link communication protocol module
Configurable battery charging current, discharging current and grid charging current
AC OUT button to control the AC output directly
Multiple LED indicators to dynamic display the status
Supports cold start and soft start
Comprehensive electronic protection features
Battery types: AGM,GEL,FLD,LFP8/LFP15/LFP16,LNCM7/LNCM14
2 year product guarantee

Technical Specifications

Model	UP5000-HM8042
Item number	80425000
EAN Code	4260558573500
Norminal battery voltage	48VDC
Battery input voltage	43,2 ~ 64VDC
Max. battery charging current	80A
Inverter output
Continuous output power	5000W
Max. surge power(3S)	8000W
Output voltage range	220VAC(-6% ~ +3%),230VAC(-10% ~ +3%)
Output frequency	50/60Hz ± 0,2%
Output wave	Pure Sine Wave
Load power factor	0,2-1(Load VA = Continuous output power)
Distortion THD	THD=3%(Resistive load)
Utility charging
Utility input voltage	176VAC ~ 264VAC(Default) 90VAC ~ 280VAC(Programmable)
Utility input frequency	40 ~ 65Hz
Max. utility charge current	60A(When the Utility input voltage is 90VAC~180VAC,the Max. utility charge current is 30A)
Solar Charging
Max. PV open circuit voltage	500V? 440V?
MPPT voltage range	120 ~ 400V
Max. PV input power	4000W
Max. PV charging power	4000W
Max. PV charging current	80A
Equalize charging voltage	58,4V(AGM default)
Boost charging voltage	57,6V(AGM default)
Float charging voltage	55,2V(AGM default)
Low voltage disconnect voltage	43,2V(AGM default)
Tracking efficiency	=99.5%
Temp. compensate coefficient	-3mV/?/2V(default)
Gerneral
Surge current	95A
Zero load consumption	<1,2A (without PV and utility connection, turn on the load output)
Standby current	<0,7A (without PV and utility connection, turn off the load output)
Dimension (H x W x D)	642,5 * 381,6 * 149mm
Mounting size	620 * 300mm
Mounting hole size	F10mm
Net Weight	18kg
Enclosure	IP30
Relative humidity	< 95% (N.C.)
Arbeitstemperatur	-20? ~ 50?
Storage temperature	-25? ~ 60?
Altitude	<5000m (If the altitude exceeds 1000 meters, the actual output power is reduced according to IEC62040.)

? At minimum operating environment temperature? At 25? environment temperature

Must hybrid inverter be grounded?

If the utility is connected to the inverter (as the only input), a ground connection must be made. Nevertheless, we recommend to ground the inverter even if only the solar panels charge the battery. First of all, you must ground your off-grid system, then connect this ground to the ground terminal of the inverter. Details can be found in the manual.

How long is the manufacturer's warranty for charge controllers?

2 years

There are no reviews yet.

Contact data

First name

Last name

E-Mail