Victron Energy MultiPlus-II 48/5000/70-50 (230 V)

Victron Energy MultiPlus-II 48/5000/70-50 (230 V)

SKU: 00-50007050
HAN: PMP482505012
Category: Hybrid Inverter
Manufacturers: Victron

5000VA sine wave inverter with 4000W continuous power
Integrated 70A battery charger for 48V battery systems
PowerAssist and PowerControl for intelligent energy management
Automatic 50A grid transfer switch for uninterruptible power supply
VE.Bus interface for GX devices and Victron VRM
Ideal for ESS, photovoltaic, off-grid, marine, and RV applications

548,70 €

incl. 0% VAT , plus

Available immediately

Description
Reviews
PDF (3)

Victron Energy MultiPlus-II 48/5000/70-50 inverter and charger

INVERTER, CHARGER & AUTOMATIC TRANSFER

MultiPlus-II 48/5000/70-50. Powerful. Flexible. Reliable.

The Victron Energy MultiPlus-II combines a pure sine wave inverter, an intelligent 70A battery charger and a fast 50A transfer switch in one unit. It reliably powers 230V loads and automatically takes over the supply during a grid failure.

5,000VA inverter rating and 4,000W continuous output
Integrated 70A charger for 48V battery systems
PowerAssist, PowerControl and automatic 50A transfer switching

5,000VARated power

4,000WContinuous output at 25°C

70ABattery charging current

50ATransfer switch

MULTIPLUS-II 48/5000/70-50

Three essential functions. One integrated energy system.

The MultiPlus-II combines an inverter, battery charger and uninterrupted transfer switching—ideal for ESS, solar, off-grid, marine and motorhome applications.

Pure sine wave inverter

The stable 230V sine wave reliably powers even sensitive equipment. Up to 9,000W peak power is available for high starting currents.

Intelligent battery charger

The integrated 70A charger provides controlled charging for 48V batteries and is suitable for lithium, AGM, gel and lead-acid batteries.

Uninterrupted transfer switching

The 50A transfer switch automatically takes over the supply to connected loads during a grid failure.

Victron MultiPlus-II 48/5000/70-50 with PowerAssist and PowerControl

POWERASSIST & POWERCONTROL

Handle high load peaks without overloading the grid or generator.

PowerControl limits the current drawn from the grid or generator to the available connection capacity. If that power is insufficient, PowerAssist automatically supplements it with energy from the battery.

Prevents overloading of limited grid connections and generators
Automatic battery support during short-term load peaks
Continuous supply even when input power is limited
For household loads, tools and high-power mobile equipment

Connections and system integration of the Victron MultiPlus-II 48/5000/70-50

VE.BUS & SYSTEM INTEGRATION

From a single unit to a scalable energy system.

VE.Bus allows the MultiPlus-II to be integrated into Victron GX systems and monitored remotely through the VRM Portal. Multiple identical units can be combined for higher power or three-phase operation.

Parallel operation of up to six identical units
Support for three-phase systems
Second AC output for priority loads
Remote monitoring and configuration via a GX device and VRM Portal

TECHNICAL DATA

MultiPlus-II 48/5000/70-50 (230V)

The most important values at a glance. Open the complete data table whenever you need more detail.

48VBattery voltage

5,000VAInverter rating

4,000WContinuous output at 25°C

70AMax. battery charging current

50AAC input / transfer switch

96%Max. efficiency

Complete technical data 46 specifications

MultiPlus-II	48/5000/70-50 (230V)
Model number	PMP482505012
Battery voltage	48V
DC input voltage range	38–66V
Inverter type	Pure sine wave inverter
Rated power	5,000VA
Continuous output at 25°C	4,000W
Continuous output at 40°C	3,700W
Continuous output at 65°C	3,000W
Peak power	9,000W
Maximum efficiency	96%
Output voltage	230V AC ± 2%
Output frequency	50Hz ± 0.1Hz, 60Hz adjustable
Maximum feed-in power	5,000VA
Zero-load power	18W
Zero-load power (AES mode)	12W
Zero-load power (search mode)	2W
AC input voltage	187–265V AC
AC input frequency	45–65Hz
Maximum AC input current	50A
Transfer switch	50A
Maximum battery charging current	70A
Absorption voltage	57.6V
Float voltage	55.2V
Storage voltage	52.8V
PowerControl	Yes
PowerAssist	Yes
Second AC output	Yes, 50A
External AC current sensor	Optional, 100A
VE.Bus interface	Yes
Communication ports	2 × COM port
Remote on/off terminal	Yes
Programmable relay	Yes
Parallel operation	Up to 6 identical units
Three-phase operation	Yes
Operating temperature	-40°C to +65°C
Cooling	Temperature-controlled fans
Humidity	Max. 95%, non-condensing
Maximum operating altitude	2,000m
Protection rating	IP22
Enclosure material	Steel, blue (RAL 5012)
Battery connections	Four M8 bolts, 2 × positive / 2 × negative
AC connections	Screw terminals, 13mm² / 6 AWG
Dimensions (H × W × D)	565 × 320 × 149mm
Weight	30kg
Safety	EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
EMC (emissions / immunity)	EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Protection features	Output short circuit, overload, battery overvoltage/undervoltage, overtemperature, 230V AC on inverter output and excessive input ripple voltage

Note: System sizing, fuse ratings and cable cross-sections must match the battery, maximum DC current draw and intended AC load. Parallel and three-phase systems must use identical units configured for the application.