Victron Energy Phoenix Inverter 48/3000 – 3000W Pure Sine Wave Inverter for 48V Battery Systems

Victron Energy Phoenix Inverter 48/3000 – 3000W Pure Sine Wave Inverter for 48V Battery Systems

SKU: 00-3403048
HAN: PIN482300000
Category: Victron Reiner Sinus
Manufacturers: Victron

Pure sine wave inverter with 3000VA output for 12V, 24V, or 48V battery systems
SinusMax technology with up to 6000W peak power for reliably starting inductive loads
Supports parallel operation of up to six units as well as 3-phase operation
VE.Bus interface for configuration, monitoring, and integration into Victron energy systems
Ideal for motorhomes, boats, off-grid/standalone setups, and commercial power supply applications

439,45 €

incl. 0% VAT , plus

Available immediately

Description
Reviews
PDF (3)

PURE SINE WAVE INVERTER

Phoenix Inverter 48/3000. Stable 230V power from 48V.

The Victron Energy Phoenix Inverter 48/3000 converts power from a 48V battery system into a stable 230V sine wave output. A 3,000VA rating, 2,400W continuous output at 25°C and 6,000W peak power reliably supply even demanding appliances.

SinusMax technology with 6,000W peak power
VE.Bus for configuration, monitoring and system integration
Up to six units in parallel or in a three-phase system

3,000VARated power

2,400WContinuous output at 25°C

6,000WPeak power

95%Max. efficiency

PHOENIX INVERTER 48/3000

Clean AC power. High start-up capacity. Flexible expansion.

The Phoenix Inverter combines a precise sine wave output with high overload capacity and comprehensive VE.Bus integration—for mobile, off-grid and professional energy systems.

Pure sine wave output

The stable 230V output is also suitable for sensitive electronics, audio equipment, measuring systems and other demanding appliances.

SinusMax technology

The high peak output helps start compressors, pumps, power tools and other loads with high inrush current reliably.

Scalable system

Up to six identical units can operate in parallel or be configured as a three-phase power system.

Phoenix Inverter 48/3000 with high start-up power

SINUSMAX & HIGH START-UP POWER

Start demanding appliances reliably.

SinusMax technology delivers up to 6,000W for short periods. This enables the inverter to handle appliances whose start-up current is significantly higher than their normal operating power.

3,000VA rated power and 2,400W continuous output at 25°C
6,000W peak power for demanding start-up loads
Precise 230V output with a pure sine wave
Temperature-controlled cooling for reliable continuous operation

VE.BUS & SYSTEM INTEGRATION

Configurable, monitorable and expandable.

VE.Bus enables the Phoenix Inverter to be configured and integrated into a Victron system. With a compatible GX device, operating data can be collected centrally and monitored through the VRM Portal.

Configuration via VE.Configure and compatible Victron interfaces
Programmable relay and remote on/off connection
Parallel operation of up to six identical inverters
Three-phase operation with appropriately configured units

TECHNICAL DATA

Phoenix Inverter 48/3000

The most important specifications at a glance. Open the full data table when needed.

48VBattery system

38–66VInput voltage

3,000VARated power

2,400WContinuous output at 25°C

6,000WPeak power

95%Max. efficiency

Full technical specifications 26 specifications

Pure sine wave inverter	Phoenix Inverter 48/3000
Input voltage range	38–66V
Parallel and three-phase operation	Yes, up to 6 units
Output voltage	230V AC ± 2%
Output frequency	50Hz ± 0.1%, adjustable to 60Hz
Rated power / continuous output at 25°C	3,000VA / 2,400W
Continuous output at 40°C	2,200W
Continuous output at 65°C	1,700W
Peak power	6,000W
Maximum efficiency	95%
Zero-load power	25W
Zero-load power in AES mode	20W
Zero-load power in Search mode	12W
Programmable relay	Yes
VE.Bus communication	Yes
Remote on/off	Yes
Operating temperature	-40°C to +65°C, temperature-controlled fan
Humidity	Max. 95%, non-condensing
Enclosure	Aluminium, blue (RAL 5012)
Protection rating	IP21
Battery connection	2 × 2 M8 bolts
230V AC connection	Screw terminals
Weight	18kg
Dimensions (H × W × D)	364 × 295 × 221mm
Safety	EN 60335-1
EMC	EN 55014-1 / EN 55014-2
Warranty	5 years

Note: DC cable size, fuse protection and battery capacity must be suitable for the inverter's high input power. Parallel or three-phase operation requires identical units configured accordingly.