EPEVER® MPPT Solar Charge Controller Tracer 5415AN,50A, 150V, 12V/24V/36V/48VDC

EPEVER® MPPT Solar Charge Controller Tracer 5415AN,50A, 150V, 12V/24V/36V/48VDC

SKU: 00-2105415
GTIN: 4260558576983
Manufacturers: EPEVER

Charging current 50A; Max Open Circuit Voltage: 150V; System nominal voltage: 12/24/36/48VDC Auto
Tracking efficiency of no less than 99.5%
Maximum DC / DC conversion efficiency of 98.6%; Efficiency at maximum load up to 98%.
Support battery types: Lead-acid battery: AGM, GEL, Flooded, User; Lithium battery (additional accessories from EPEVER such as eBox-Wifi / Bluetooth, USB-RS485 cable are required for parameter setting of the lithium battery and USER)

Herstellernummer

134.41 € 0% MwSt. - § 12 Abs. 3 UStG

134,41 €

incl. 0% VAT , plus

Old price: 208,36 €

umsatzsteuerfreie Lieferung möglich

Mit dem beschlossenen Jahressteuergesetz (JStG) 2022 wurde den Ausbau von Photovoltaikanlagen für Privatkunden vergünstigt, konkret ist Nullsteuersatz mit Vorsteuerabzug für die Lieferung und Installation von Photovoltaikanlagen auf oder in der Nähe von Wohngebäuden bis 30KW- §12 Abs. 3 Nr. 1 UstG (neu). Die Befreiung von der Umsatzsteuer ab 01.01.2023 gilt auch für Teile unseres Sortiments, wie z. B. Photovoltaikmodule, Wechselrichter oder auch Batteriespeicher.

Currently out of stock

The EPEVER® Tracer AN charge controller series is based on multiphase synchronous rectification technology (Multiphase Synchronous Rectification Technology MSRT) and the expanded MPPT control method (Maximum Power Point Tracking MPPT). With its modern dual-core processor architecture and the latest hardware design, the charge controller has a very fast control speed, is very reliable and meets a high industrial standard. The MSRT technology guarantees a very high conversion efficiency for any charging power and thus increases the energy efficiency of photovoltaic systems.The extended MPPT control method minimizes the loss rate and loss time and thus increases the tracking efficiency, the adaptation speed and the conversion efficiency both at high and low instantaneous power. Thanks to the MPPT control method, all Tracer AN products are able to determine the optimal operating point of photovoltaic systems as quickly as possible and to obtain the maximum energy from the solar panels. The functionality to limit the charging power and current as well as the automatic power reduction guarantee stable operation even with oversized photovoltaic modules or at high ambient temperatures.

Product features

Multi-functional LCD display with backlight
advanced MPPT technology with a tracking efficiency of at least 99.5% and a maximum efficiency of 98%
"ultra-fast" recording speed
precise detection of maximum power points (MPP) with multiple peaks
RS485 interface with MODBUS industry standards
negative ground via (-) - pole
fully programmable functions via PC software
automatic system voltage detection 12/24/36/48V
Battery deep discharge protection, overcharge protection, overvoltage protection
Full load operation without power loss in the working environment temperature range
temperature-dependent charge parameter correction (only for lead-acid battery)
battery types adjustable (open acid, AGM, gel, user)
Solar input Module open circuit voltage up to 150 V open circuit voltage
Real-time energy statistics function
comprehensive electronic protection
wide MPP operating voltage range
overheating reduction function
Monitoring and setting of parameters via the mobile phone APP or PC software possible

Technical specifications

Manufacturer model	Tracer5415AN
Article number	2105415
Rated voltage	12/24/36 / 48VDC auto
Rated charging current	50A
Discharge current	50A
Max. PV open circuit voltage	150V
MPP voltage range	(Battery voltage + 2) ~ 108V
Max. PV input power	625W / 12V, 1250W / 24V, 1875W / 36V, 2500W / 48V
Max. PV Array power	937.5W/12V, 1875W/24V, 2812.5W/36V, 3750W/48V
Own electricity consumption	98mA / 12V, 60mA / 24V, 50mA / 36V, 46mA / 48V
Temperature compensation coefficient	-3mV / ° C / 2V (default)
RS485 interface	RS485 (RJ45)
Temperature range	-25 ° C to + 45 ° C
Degree of protection	IP20
Dimensions	261 * 216 * 119mm
Net weight	3.5Kg

Which charge controller of EPEVER support lithium battery?

The MPPT Tracer AN, XTRA N and Triron N series solar charge controllers can be configured to charge lithium battery storage devices. but the parameters of lithium battery must be set by app, PC software and MT50 display. It is important that these storage devices have their own battery management system (BMS), which does not require communication with the solar charge controller.

What are grounding specifications for Lithium Battery Solar System?

The controllers of EPEVER are divided into the common positive and common negative. If the common positive BMS and negative ground controller are used together, it would cause damage to the controller or lithium battery. Therefore, when configuring a lithium battery solar off-grid system, please select the corresponding controller according to the BMS specifications (a lithium battery with a common anode selects a controller with a common anode.)

Can the charge controllers of EPEVER be connected in parallel?

Only the MPPT Tracer 50A-100A charge controllers support up to 6 units in prallel by using a parallel adapter (PAL-ADP-50AN). After adding the parallel adapter, the charging current of each controller can be adjusted automatically in real-time. The charging operation status of the controller is automatically adjusted according to the battery charging state to improve the redundancy of the entire photovoltaic system.

What is multi-stage charging (bulk charging, constant charging and float charging)?

Bulk charging In this stage, the battery voltage has not reached constant voltage (Equalize or Boost Voltage) yet. The controller operates in constant current mode, delivering its maximum current to the batteries (MPPT Charging). When the battery voltage reaches a preset value, it will switch to Constant Charging. Constant charging When the battery voltage reaches the constant voltage setpoint, the controller will start to operate in constant charging mode, and this process is no longer MPPT charging. In the meantime, the charging current will drop gradually, and the process is not the MPPT charging. The Constant Charging has 2 stages, equalize, and boost. These two stages are not carried out constantly in a full charge process to avoid too much gas precipitation or overheating of the battery. Among them, equalize charging starts only on the 28th of each month. a) Boost charging The Boost stage maintains 2 hours in default (user can adjust the constant time and preset value of boost voltage according to demand). When the duration reaches the set value, the system will switch to floating charging. b) Equalize charging Some types of batteries benefit from equalizing charges regularly, which can stir electrolytes, balance battery voltage, and accomplish chemical reactions. Equalizing charge increases battery voltage, higher than the standard complement voltage, which gasifies the battery electrolyte. The equalizing charging time is also 2h by default (settable). Equalize charge and boost charge are not carried out constantly in a full charge process to avoid too much gas precipitation or overheating of the battery. Floating charging After the Constant voltage stage, the controller will reduce the charging current to the Float Voltage setpoint. This stage will have no more chemical reactions, and all the charge current transforms into heat and gas at this time. Then the controller reduces the voltage to the floating stage, charging with a smaller voltage and current. It will reduce the temperature of the battery and prevent the gassing and charging the battery slightly at the same time.

What’s the advantage of the Remote Battery Voltage Sensor (only for charge controller 50A-100A)?

Remote Battery Voltage Sensor (RBVS) can eliminate the impact of the voltage drop on the battery connection wire. And it collects more accurate battery voltage to achieve accurate voltage control of the battery.

How to set lithium battery parameters in “USER” mode?

When selecting the “User” type to set the parameters of the lithium battery, the following precautions must be followed: 1) The control voltage parameters must be set by referring to the specifications of the lithium battery protection board, and the accuracy requirement of the lithium battery protection board is not greater than 0.2V. If the deviation is greater than 0.2V, which causes an abnormality in the system, EPEVER shall not directly or indirectly be liable for any loss or danger. 2) The temperature compensation coefficient is changed to 0; 3) The equalized voltage and the boosted voltage are the same, and the time is the same; 4) Each voltage point must follow the following logic. a. Overvoltage Disconnect Voltage > Over-Charging Protection Voltage(from BMS) +0.2V; b. Overvoltage Disconnect Voltage > Overvoltage Reconnect Voltage ≥ Charging Limit Voltage ≥ Equalize Charging Voltage = Boost Charging Voltage ≥ Float Charging Voltage ＞ Boost Reconnect Charging Voltage; c. Low-voltage Reconnect Voltage ＞ Low-voltage Disconnect Voltage ≥ Discharge Limit Voltage; d. Under-voltage Warning Reconnect Voltage ＞ Under-voltage Warning Voltage ≥ Discharge Limit Voltage; e. Low-voltage Disconnect Voltage ＞ Over-discharge Protection Voltage(from BMS) +0.2V; Warning: Please choose a lithium battery controller for lithium battery applications. It is not recommended to use a non-lithium battery controller to charge the lithium battery. If the system fails due to the use of a mismatched controller, EPEVER shall not directly or indirectly be liable for any loss or danger.

How long is the manufacturer's warranty for charge controllers?

2 years