The EPEVER® ViewStar AU (VSxxxxAU series) solar charge controller is a PWM charge controller with built-in LCD display using the most advanced digital display Technology. The multiple load control modes make this possible widely used on solar home system, traffic signal, solar street lamp, solar garden lamp, etc.
Product Features
- Intelligent 3-level PWM charge detection: Bulk, Boost / Equalize, Float
- 3 supported battery options: Sealed, Gel, and Flooded
- LCD display
- Multiple load control types
- Battery temperature compensation
- Extensive electronic protection
- Keeps the battery fully charged
- Usable for acid, AGM, gel
- Polarity reversal protection for battery and solar panel
- External battery temperature sensor can be connected
- Prevents damage to the battery
- Automatic shutdown if the charging current exceeds the capacity of the regulator
- Timer function option for night lighting
- LCD display
- PWM modulation
- 2 USB ports
Technical specifications
Model of manufacturer | VS6048AU |
EAN | 4260558571964 |
Article number | 2504860 |
Related Charge current | 60A |
Max. PV open circuit voltage | 96V |
USB output | 5VDC/2.4A |
Nominal voltage | 12/24/36/48V DC Auto |
Grounding | Positiv |
Temperature | -20°C bis +55°C |
Dimension | 214 * 128,7 * 72,2mm |
Weight | 1040g |
Enclosure | IP30 |
Product safety information
Manufacturer information:
SolarV GmbH
Am Kronberger Hang 2
Hessen
Schwalbach am Taunus, Deutschland, 65824
info@solarv.de
www.solarv.de
What are the main references when selecting PWM controllers and MPPT controllers for solar panels?
PWM controller: The total open-circuit voltage of solar panels connected in series must not exceed the maximum open-circuit voltage allowed by the controller, and the total short-circuit current in parallel connection must not exceed the rated charging current of the controller.
* The PV modules voltage must match the battery system voltage.(12V/24V/36V48V) , otherwise the utilization of PV modules will be reduced.
MPPT controller: the total power of solar panels must not exceed the maximum power allowed by the controller (1.5 times of the rated power). The total open-circuit voltage in the series connection must not exceed the maximum open-circuit voltage allowed by the controller (the maximum open-circuit voltage at 25 °C).
Which charge controller of EPEVER support lithium battery?
The MPPT Tracer AN, Xra N and Triron N solar charge controllers can be configured to charge lithium battery storage devices. but the parameters of lithium battery must be set by app, PC software and MT50 display. It is important that these storage devices have their own battery management system (BMS), which does not require communication with the solar charge controller.
Can the charge controllers of EPEVER be connected in parallel?
Only the MPPT Tracer 50A-100A charge controllers support up to 6 units in prallel by using a parallel adapter (PAL-ADP-50AN). After adding the parallel adapter, the charging current of each controller can be adjusted automatically in real-time. The charging operation status of the controller is automatically adjusted according to the battery charging state to improve the redundancy of the entire photovoltaic system.
How long is the manufacturer's warranty for charge controllers?
2 years
There are no reviews yet.