The new generation of PV Module made of 182mm mono solar cells, which will be the trend of the foreseeable future, will effectively empower your solar system. With the improvement of the manufacturing technology, the internal resistance of 182mm PV Module will be reduced, which results in less heat loss during power generation. Thus, solar energy will be converted into electricity more efficiently. The advantage of 182mm PV Module will be even more obvious with higher irradiance of the sun and higher ambient temperature. Therefore, the new 182mm PV Module is a great choice for PV System.
Special features
- Construction with 182mm monocrystalline PERC cells
- With 10 multi-busbars, less resistance, and more stability
- Increased cell efficiency above 23.1%
- Less gaps between the solar cells and thinner busbar design
- More solid energy generation with the added copper and excellent performance in case of the low light
- Reduced installation area and costs
- 2 pcs integrated bypass diode
- Surface made of hardened ESG solar glass with weatherproof coating
- Unique, extra robust frame made of anodized aluminum
- 90 cm long solar cable; 2.5 mm² connected with MC-4 connectors
- TÜV certified according to standards IEC61215, IEC61730
- Plus tolerance guarantee (+ 3%), performance guarantee up to 10 years with 90% and up to 25 years with 80%
Electrical characteristics
| Product model |
Eco Line ES180M |
| Item number |
1140180 |
| EAN Code |
4260558572824 |
| Cells |
68 (4x17) |
| Max. power (Pmax) |
180W |
| Max. voltage (Vmp) |
18.2V |
| Max. current (Imp) |
9.89A |
| Open circuit voltage (Voc) |
22.4V |
| Short circuit current (Isc) |
10.75A |
| Temperature coefficient of Voc |
-0.36%/K |
| Temperature coefficient of Isc |
0.05%/K |
| Temperature coefficient of power |
-0.44%/K |
| Normal operating cell temperature |
44+/-2℃ |
| Operating temperature |
-40 ~ +85℃ |
| Max. System voltage |
1000VDC |
| Power tolerance |
0 ~ +3% |
| Junction Box |
Wasserdicht IP67,1000VDC |
| Bypass Diodes |
2 pc |
| Module dimension |
1270 * 765 * 35 mm |
| Module weight |
11.2 kg |
- Measured at standard test conditions: irradiance 1,000W/ m², air mass 1.5 spectrum, temperature 25℃.Electrical parameters may vary by-5% to +5%
Product safety information
Manufacturer information:
SolarV GmbH
Am Kronberger Hang 2
Hessen
Schwalbach am Taunus, Deutschland, 65824
info@solarv.de
www.solarv.de
How many bypass diode are installed in solar panel?
Solar panel 10W-80W has one bypass diode; solar panel 100W-320W has two bypass diodes. Exception: 1100100 (100W) has only one diode and 1160105 (XL 100W) has two diodes.
What is the function of the bypass diode?
The bypass diodes’ function is to eliminate the hot-spot phenomena which can damage PV cells and even cause fire if the light hitting the surface of the PV cells in a module is not uniform.
How does shading affect the performance of solar panel?
When solar panels are exposed to shady conditions, their efficiency drops, and their performance suffers as a result. Environmental obstructions such as trees or nearby buildings, clouds, self-shading between panels in parallel rows, dirt, dust, and various other trash such as bird droppings, all cause shading. These shading effects may be static as a result of the obstruction’s location, or dynamic in certain situations, such as a shadow cast by moving clouds. Therefore, eliminating solar shading problems is the most effective way to avoid them.
How can I check the power of my panel?
Measure the open circuit voltage and short circuit current of your solar panel with multimeter and compare the result with the technical data of the panel. Please also note that the calculated values from technical data are ideal values and depend on various factors such as temperature, angle, compass direction, irradiance, air mass, humidity, solar radiation (impairment e.g., by high fog), resistances in cables, connectors, and charge controllers, etc.
Can different solar panels be connected?
Solar panels with the same (or slightly deviated value +/- 1V) voltage (V) but different power (W) can be connected in parallel without any problem.
Solar panels of different voltage and power must not be connected in parallel, because the solar panel with the lowest voltage determines the voltage output of the whole array. When connecting solar panels together in parallel it is important that they ALL have the same nominal voltage value, but it is not necessary that they have the same ampere value.
Solar panels with the same (or slightly deviated value +/- 1A) current (A) but different power (W) can be connected in series without any problem.
Solar panels of different current and power should not be connected in series, because the solar panel with the lowest current determines the current output of the whole array.
In fact, we do not recommend a parallel/series connection of the different solar modules, as a loss of power cannot be avoided in any case.
There are no reviews yet.
