enjoysolar® Monokristallin 9BB 190W/12V - (0% Mwst)

enjoysolar® Monokristallin 9BB 190W/12V - (0% Mwst)

SKU: 00-1160190
GTIN: 4260558577188
Manufacturers: enjoy solar

Max. voltage (Vmp): 18.24 V
Max. current (Imp): 10.42 A
Open-circuit voltage (Voc): 21.40 V
Short-circuit current (Isc): 10.93 A
Module dimensions: 1390 x 700 x 35 mm
Module weight: 10.9 kg
Suitable for 24V solar systems with a compatible charge controller

75,59 €

incl. 0% VAT , plus

Available immediately

Description
FAQ
Reviews

enjoy solar monocrystalline PERC solar panel 190W 12V

COMPACT 12V PERC SOLAR PANEL

190W solar power. Efficient in a compact area.

The enjoy solar® Eco Line ES190M36 combines large-format 166mm PERC cells with modern 9-busbar technology. The compact 12V panel is particularly suitable for motorhomes, boats and off-grid solar systems with limited installation space.

190W rated power for high-performance 12V systems
PERC cells with a cell efficiency of up to 22.9%
Robust aluminium frame and tempered ESG solar glass

PERC + 9 BUSBARS

Higher yield from the available panel area.

Larger PERC cells and nine finer current conductors shorten the current paths, reduce electrical losses and improve cell stability.

Efficient PERC cells

The 166 × 166mm monocrystalline cells use the panel area efficiently and reliably generate energy even under low-light conditions.

9-busbar technology

Nine narrow busbars reduce electrical resistance, distribute mechanical loads and reduce the risk of microcracks.

Positive power tolerance

An output power tolerance of 0 to +3% provides additional assurance regarding the panel’s actual available power.

enjoy solar solar panels on a garden shed

STABLE & WEATHER-RESISTANT

Designed for long-term outdoor use.

The robust construction provides reliable protection against mechanical loads and weather conditions while ensuring high stability—even under demanding operating conditions.

Wind loads up to 2,400Pa and snow loads up to 5,400Pa
Tempered ESG solar glass
Corrosion-resistant aluminium frame
Operating temperature from -40°C to +85°C

Connections and dimensions of the enjoy solar 190W PERC solar panel

READY FOR CONNECTION

Compact dimensions. Easy system integration.

With dimensions of 1390 × 700mm, the panel makes efficient use of narrow installation areas. The pre-assembled solar cable and compatible connectors enable quick integration into new or existing 12V solar systems.

90cm solar cable with a 4mm² cable cross-section
Pre-assembled compatible solar connectors
2 bypass diodes reduce power losses
Suitable for motorhomes, campervans, boats and stand-alone off-grid systems

TECHNICAL DATA

PERC Series 190W 12V

The most important technical data at a glance. Further details are available in the complete data table.

18.24 VMax. voltage (Vmp)

10.42 AMax. current (Imp)

21.40 VOpen-circuit voltage (Voc)

10.93 AShort-circuit current (Isc)

1390 × 700 × 35mmDimensions

10.9 kgWeight

Complete technical data 22 specifications


Model	Eco Line ES190M36
Item number	1160190
EAN code	4260558573197
Cell type	Monocrystalline PERC solar cells, 166 × 166mm
Solar cells	32 (4 x 9)
Max. power (Pmax)	190W
Max. voltage (Vmp)	18.24 V
Max. current (Imp)	10.42 A
Open-circuit voltage (Voc)	21.40 V
Short-circuit current (Isc)	10.93 A
Temperature coefficient of Voc	-0.36%/K
Temperature coefficient of Isc	+0.05%/K
Temperature coefficient of power	-0.44%/K
Operating temperature	-40°C to +85°C
Max. system voltage	1000V DC
Power tolerance	0 to +3%
IP rating	IP65
Bypass diodes	2 units
Connection cable and connectors	4mm² × 90cm, solar connectors (+/−)
Certifications	IEC 61215, IEC 61730
Dimensions	1390 × 700 × 35 mm
Net weight	10.9 kg

Note: The specified electrical values apply under STC conditions (irradiance 1000W/m², cell temperature 25°C, air mass AM 1.5). Actual energy yield may vary depending on environmental and installation conditions, particularly temperature, orientation, tilt angle, shading and system losses.

WIRING CONFIGURATION

Series or parallel?

(Simplified example)

Series connection

Parallel connection

Before making any connections, verify that the voltage and current remain within the permissible input ratings of the connected equipment.

SYSTEM COMPATIBILITY

Is the module compatible with your device?

Typical system configuration: The solar module is connected to the battery through a suitably rated charge controller. A compatible inverter is additionally required to supply 230 V AC loads. All components must be correctly matched in terms of voltage, current and power rating.

INSTALLATION

Optimally Fine-tune

Tilt angle Location-dependent alignment

Shading Avoid wherever possible, including partial shading

Mounting system Select a solution suitable for the mounting surface

Position the module for maximum solar exposure and minimise shading wherever possible. The optimum tilt angle and orientation depend on the installation site. Use a mounting system suitable for the supporting surface and rated for the applicable wind and snow loads. The illustrated 30° angle is provided solely as an example.

Important: Before purchasing or connecting the module, confirm that its voltage, current and power ratings are compatible with the PV input of the intended equipment. Observe the correct polarity, cable cross-section, overcurrent protection and all connection requirements specified by the respective equipment manufacturers. Do not disconnect connectors under load, and use only compatible, approved connectors.

How many bypass diode are installed in solar panel?

Solar panel 10W-80W has one bypass diode; solar panel 100W-320W has two bypass diodes. Exception: 1100100 (100W) has only one diode and 1160105 (XL 100W) has two diodes.

What is the function of the bypass diode?

The bypass diodes’ function is to eliminate the hot-spot phenomena which can damage PV cells and even cause fire if the light hitting the surface of the PV cells in a module is not uniform.

How does shading affect the performance of solar panel?

When solar panels are exposed to shady conditions, their efficiency drops, and their performance suffers as a result. Environmental obstructions such as trees or nearby buildings, clouds, self-shading between panels in parallel rows, dirt, dust, and various other trash such as bird droppings, all cause shading. These shading effects may be static as a result of the obstruction’s location, or dynamic in certain situations, such as a shadow cast by moving clouds. Therefore, eliminating solar shading problems is the most effective way to avoid them.

How can I check the power of my panel?

Measure the open circuit voltage and short circuit current of your solar panel with multimeter and compare the result with the technical data of the panel. Please also note that the calculated values from technical data are ideal values and depend on various factors such as temperature, angle, compass direction, irradiance, air mass, humidity, solar radiation (impairment e.g., by high fog), resistances in cables, connectors, and charge controllers, etc.

Can different solar panels be connected?

Solar panels with the same (or slightly deviated value +/- 1V) voltage (V) but different power (W) can be connected in parallel without any problem. Solar panels of different voltage and power must not be connected in parallel, because the solar panel with the lowest voltage determines the voltage output of the whole array. When connecting solar panels together in parallel it is important that they ALL have the same nominal voltage value, but it is not necessary that they have the same ampere value. Solar panels with the same (or slightly deviated value +/- 1A) current (A) but different power (W) can be connected in series without any problem. Solar panels of different current and power should not be connected in series, because the solar panel with the lowest current determines the current output of the whole array. In fact, we do not recommend a parallel/series connection of the different solar modules, as a loss of power cannot be avoided in any case.